Febi Bilstein Waterpump & Thermostat Housing Kit – 182330

Description

Febi Bilstein Water Pump & Thermostat Housing Kit – 182330

If your VAG vehicle is fitted with the EA888 Gen.3 engine – a 2.0 TSI petrol engine found across a wide range of Volkswagen, Audi, SEAT, Skoda, and CUPRA models – there is a well-documented issue you should be aware of. The water pump and thermostat housing on these engines are known to develop leaks over time, often leading to coolant loss, overheating warnings, and potentially serious engine damage if left unaddressed.

This Febi Bilstein kit gives you everything you need to replace both the water pump and thermostat housing in one go, using OE-quality components. Febi Bilstein are a trusted German supplier of aftermarket parts that meet or match original manufacturer specifications, so you can expect a proper fit and reliable performance from this kit.

What Does This Kit Fix?

The EA888 Gen.3 engine uses a water pump (the component that circulates coolant around the engine to keep it at the right temperature) and a thermostat housing (the unit that controls when coolant flows to the radiator). On these engines, both components are known to crack, warp, or develop leaks – often from the housing itself rather than just a seal or gasket. This is not a minor issue. A coolant leak left unattended can cause the engine to overheat, which risks significant and expensive damage.

Replacing both the water pump and thermostat housing together – rather than just one or the other – is the recommended approach. Since the components work closely together and share the same coolant circuit, replacing both at the same time saves labour and reduces the risk of having to revisit the job shortly after.

Why Choose Febi Bilstein?

Febi Bilstein have been supplying the automotive industry for over 170 years. Their parts are manufactured to meet OE (original equipment) standards, meaning they are designed to match the fit, form, and function of the parts that came with your vehicle from the factory. This kit is a direct replacement – no modifications required.

What’s Included

• Replacement water pump
• Thermostat housing
• Associated seals and gaskets required for installation

Important: When replacing the water pump and thermostat housing, the cooling system must be properly drained beforehand and refilled with the correct coolant specification afterwards. Always follow the manufacturer’s torque settings during installation. If you are not confident carrying out this repair yourself, we strongly recommend having it fitted by a qualified mechanic.

Vehicle Fitment

This kit is designed for VAG group vehicles fitted with the EA888 Gen.3 2.0 TSI engine, covering models from Volkswagen, Audi, SEAT, Skoda, and CUPRA. Use the vehicle lookup tool on this page to confirm compatibility with your specific model and year, or refer to the Vehicle Fitment tab for the full list of compatible applications.

OE Cross Reference Numbers